XGRIDS K2 Extension Pole Kit 2 m

2 m Telescopic Pole with Adapter for XGRIDS Lixel K2 Handheld 3D Scanner

2 m telescopic pole with mount for XGRIDS 3D scanner — an accessory for the XGRIDS Lixel K2 used to change the scanner height during spatial data collection. The 2 m pole allows the device to be positioned higher relative to the operator and used from a different point while following the scanning route.

Accessory Purpose

The telescopic pole is used as additional equipment for the XGRIDS Lixel K2 handheld 3D scanner. The scanner is installed on the upper mount, after which the operator can position it higher than during standard handheld operation.

The accessory is used in situations where the characteristics of the object or scanning conditions require a different scanner mounting height.

Use During 3D Scanning

The pole helps change the position of the XGRIDS Lixel K2 relative to the operator without changing the operating principle of the scanner itself. Spatial data collection and generation are performed by the Lixel K2, while the telescopic structure is used to position it at the required height.

Pole length — 2 m.

Compatibility

The accessory is designed for use with XGRIDS Lixel K2.

Buy a Telescopic Pole for the XGRIDS Lixel K2 3D Scanner

Order the 2 m telescopic pole with mount for XGRIDS Lixel K2 on our website. If you need help selecting compatible accessories or have questions about using the pole, contact our managers.